LD-100RS-SS Automatic Label Dispenser

Details

The Models LD-100-RS and LD-200-RS use the latest opt-electronic technology so there is just one simple adjustment for label length. A special Reflective Sensor sits below the label and reliably and accurately senses the leading edge of your label. As you pick up a label, the next one is automatically and instantly advanced. The modern design presents the label right at the front of the machine, providing optimum convenience for both left-handed and right-handed operators.

A “HIGH-LOW” Speed Switch allows adjustment for label length or operator preference. There are no mechanical position switches to cause adjustment or operational problems.

Designed for all-day, every day use, the LD-100-RS and LD-200-RS Automatic Label Dispensers are backed by LABELMATE’s famous 3-Year Parts and Labor Limited Warranty, assuring you trouble-free performance.

LD-100RS-SS Automatic Label Dispenser Features

  • Easy access to dispensed labels
  • Equally convenient for right and left handed operators
  • Works with labels as short as 1/4 inch
  • Small footprint

 


Model 110 Wipe-On Label Applicator

Details

Auto Labe’s Automatic Label Applicators have proven reliability and are available with many options. The versatility of their label applicators permits labeling from the top, bottom or sides of any product. Their automatic applicators can be used on an existing line or incorporated in a turn-key system. The efficiency of these applicators means uncomplicated set up, easy operation and quick change over from one product to another.

Model 110 Wipe-On Label Applicator Features

WIPE-ON OPERATIONAL SEQUENCE
The product is guided to the applicator using a consistent conveyor speed. A product sensor detects the product and starts the label applicator. The label is dispensed matching the speed of the conveyor. A roller or brush is used to wipe-down the label to ensure proper adhesion.

Model 110 Wipe-On Label Applicator Specifications

  • Dimensions: 15″/38cm
  • Weight: 29 lbs/13kg (approx.)
  • Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
  • Air: n/a
  • Labels: Standard 4 1/2″ web width 10″ O.D. roll with 3″ core
  • Die cut with 1/8″ spacing

 


 

Details

Designed for non-contact applications or where container recessed areas require accurate label placement, this Blow-On Applicator works at any angle and special rotational mounts are available. The standard label vacuum grid is 1/2″ x 4 1/2″. Custom vacuum grids can be made to accommodate most label sizes. The Model 130 Blow-On Applicator is ideal for custom applications where other labeling methods are inefficient.

Model 130 Blow-On Automatic Label Applicator Features

BLOW-ON OPERATIONAL SEQUENCE
The product is consistently guided to the applicator and can be moving or stopped at the point of application. The label is stripped from the web and is held on a blow grid by vacuum. When the sensor or switch detects the product, the label is blown onto the product with a blast of air.

Model 130 Blow-On Automatic Label Applicator Specifications

  • Dimensions: 17″/43cm
  • Weight: 35 lbs/16kg (approx.)
  • Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
  • Air: 80 to 100 PSI G/3 CFM
  • Labels: Standard 4 1/2″ web width 10″ O.D. roll with 3″ core
  • Die cut with 1/8″ spacing
  • Labeling Speed: 1250″ continuous web speed per minute

 

Model 140 Tamp-Down Automatic Label Applicator

Details

Auto Labe’s Automatic Tamp-Down Label Applicator applies a pressure sensitive label utilizing a positive tamp action to ensure completed label adhesion on the product container or package. Tamp heads of different material from hard to spongy allow for product variation or surface differences. The Tamp-Down Applicator may be used in any direction and a variety of tamp heads are available.

Model 140 Tamp-Down Automatic Label Applicator Features

TAMP-DOWN OPERATIONAL SEQUENCE
The product is consistently guided to the applicator and can be moving or stopped at the point of application. The label is stripped from the web and is held on a tamp head by vacuum. When the sensor or switch detects the product, the air cylinder extends pressing the label onto the product.

Model 140 Tamp-Down Automatic Label Applicator Specifications

  • Dimensions: 17″/43cm
  • Weight: 35 lbs/16kg (approx.)
  • Electric: 115VAC/60Hz/1 AMPS (max.) or 220VAC/50Hz
  • Air: 80 to 100 PSI G/3 CFM
  • Labels: Standard 4 1/2″ web width 10″ O.D. roll with 3″ core
  • Die cut with 1/8″ spacing
  • Labeling Speed: 1250″ continuous web speed per minute

 


 

 

Model 160 Stepper Drive Labeler

Model 160 Stepper Drive Labeler Features

  • High speed stepper motor driven
  • LCD operator interface for easy menu selection
  • Photo electric label sensor for greater accuracy
  • Label roll capacity up to 16 inch outer diameter
  • Self teaching applicator for easy label size changeover
  • Left and right hand models
  • Exceptional label placement accuracy

Model 160 Stepper Drive Labeler Specifications

  • Dimensions: 24″ x 37″ x 39″
  • Weight: 70 lbs/31.75kg (approx.)
  • Electric: 110VAC/60Hz/5 AMPS (max.) or 220VAC/50Hz
  • Labeling Speed: Up to 3000 inches per minute
  • Web Width: Up to 6.5 inches

Model 160 Stepper Drive Labeler Options

  • Adjustable heavy duty stand
  • Photo electric product sensor
  • Hot stamp imprinting
  • Conveyor systems
  • Encoder interface
  • Spare parts kit

 


Model 461 Cartridge Produce Label Applicator

Model 461 Cartridge Produce Label Applicator Specifications

  • Dimensions: 4.5″/11.5cm W x 32″/81cm L x 24.75″/63cm H
  • Weight: 25 lbs/11.36 kg (approx.)
  • Electric: 115VAC/60Hz/2 AMPS (max.)
  • Labels: Standard 1″ web width 14″ O.D. roll with 3″ core pressure sensitive/die cut
  • Labeling Speed: 600+ per minute

Model 461 Cartridge Produce Label Applicator Options

  • Connection Kits for Automatic Sizers
  • Wide Label and Spare Parts Kits